|
General Description |
The SS119 is a unipolar Hall-effect sensor IC fabricated from bipolar technology. The device integrates a voltage regulator, reverse battery protection diode, Hall sensor with dynamic offset cancellation system, temperature compensation circuitry, small signal amplifier, Schmitt trigger and an open-collector output to sink up to 25 mA. With suitable output pull up, they can be used with bipolar or CMOS logic circuits.
|
|
Features and Benefits |
4.5V to 24V Operation |
|
-40°C to 150°C Superior temperature operation |
|
Bipolar technology |
|
Open-collector 25 mA output |
|
Reverse battery protection |
|
Small Size-SOT23 3L or SIP 3L |
|
Solid-state reliability |
|
Resistant to physical stress |
|
Activate with small, commercially available Permanent magnets |
|
Application Examples |
Automotive, Consumer and Industrial |
|
Solid-state switch |
|
Brushless DC motor commutation |
|
Speed detection |
|
Linear position detection |
|
Angular position detection |
|
Proximity detection |
|
Packages |
3 pin SOT23W (suffix SO) |
3 pin SIP (suffix UA) |
 |
 |
|
Detail DataSheet |
SS119_N.pdf |
